[Q27-Q44] Try 100% Updated JN0-663 Exam Questions [2021]

Try 100% Updated JN0-663 Exam Questions [2021]

Pass JN0-663 Exam - Real Questions & Answers

For more info visit:

NEW QUESTION 27
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

A. The vrf-target configuration allows routes to be shared between CE-1 and CE-2.
B. The vrf-target configuration stops routes from being shared between CE-1 and CE-2.
C. The route-distinguisher configuration allows routes to be shared between CE-1 and CE-2.
D. The route-distinguisher configuration stops routes from being shared between CE-1 and CE-2.

Answer: B,C

NEW QUESTION 28
Exhibit:

R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)

A. Apply the no-export policy as an import policy under group 65001
B. Apply the no-advertise policy as an export policy under group 65003
C. Apply the no-advertise policy as an import policy under group G5001
D. Apply the no-export policy as an export policy under group 65003

Answer: B,C

NEW QUESTION 29
Exhibit:

Which two statements regarding the output shown in the exhibit are correct? (Choose two.)

A. The PEs have matching control word values.
B. The type of connection is remote.
C. The label associated with this virtual circuit is out of range.
D. The type of connection is local.

Answer: A

NEW QUESTION 30
Exhibit:

Referring to the exhibit, which two statements are correct? (Choose two.)

A. R1 will never forward transit traffic through R2.
B. The OSPF interface metrics on R2 are all set to 65535.
C. Transit traffic from R1 to R4 will traverse R3.
D. R2 stops sending LSAs into the network.

Answer: B,C

NEW QUESTION 31

You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?

A. Configure the import parameter and apply the policy to the my-ext-groupBGP group configuration.
B. Configure the export parameter and apply the policy to the my-ext-groupBGP group configuration.
C. Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp.13vpn.0 routing table.
D. Configure the vrf-exportparameter and apply the policy under the edit routing-instances vpn-ahierarchy.

Answer: D

NEW QUESTION 32
Exhibit:

Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.
Which two EVPN functions accomplish this task? (Choose two.)

A. aliasing
B. split horizon
C. designated forwarder election
D. multicast ingress replication

Answer: B,C

NEW QUESTION 33
You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict.
What are two considerations when performing this task? (Choose two.)

A. On outbound traffic, interface policers are applied before firewall filters.
B. On inbound traffic, firewall filters are applied before interface policers.
C. On inbound traffic, interface policers are applied before firewall filters.
D. On outbound traffic, firewall filters are applied before interface policers.

Answer: C,D

NEW QUESTION 34
You are responsible for configuring CoS for your network Your network includes a video application with strict latency requirements, so that any packets delayed by more than 75 ms are effectively useless. You want to ensure that you do not waste buffer space.
When configuring the scheduler for this application, which feature would you use?

A. rate limit
B. exact
C. temporal
D. remainder

Answer: C

NEW QUESTION 35
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

A. The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.
B. The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.
C. An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.
D. An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.

Answer: B,C

NEW QUESTION 36
Exhibit:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)

A. set policy-options policy-statement ISP term ROUTES then reject
B. set policy-options policy-statement ISP term REST then reject
C. set policy-options as-path LOCAL-ROUTES "()"
D. set policy-options as-path LOCAL-ROUTES " (65310 I 65441) +"

Answer: B,C

NEW QUESTION 37
Exhibit:

You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512.
In this scenario, what is the remote site ID?

A. 0
B. 1
C. 2
D. 3

Answer: A

NEW QUESTION 38
Exhibit:

You have a Layer 3 VPN established between PE-1 and PE-2 as well as between PE-1 and PE-3. You are using a route reflector (RR-1) to distribute VPN routes to your IBGP peers. You are asked to ensure that only relevant routes are sent from RR-1 to each of the PE routers.
Referring to the exhibit, which statement is correct?

A. You should use VRF export policies on RR-1 to control which routes are sent to each PE router.
B. You should use route target filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
C. You should use route target filtering only on RR-1 to control which routes are sent to each PE router.
D. You should use firewall filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.

Answer: C

NEW QUESTION 39
You must deploy an interprovider VPN option that ensures that the ASBRs do not need to store any VPN routes.
In this scenario, which interprovider VPN option should you choose?

A. option B
B. option A
C. option C
D. option D

Answer: C

NEW QUESTION 40
Exhibit:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)

A. set policy-options policy-statement ISP term ROUTES then reject
B. set policy-options policy-statement ISP term REST then reject
C. set policy-options as-path LOCAL-ROUTES "()"
D. set policy-options as-path LOCAL-ROUTES " (65310 I 65441) +"

Answer: B,C

NEW QUESTION 41
Exhibit:

You must configure an OSPF virtual link to facilitate communication between Area 0 and Area 20.
Referring to the exhibit, which two addresses should you use as the neighbor IDs of the virtual link endpoints?
(Choose two.)

A. The address that is associated with R2's xe-1/2/0 interface.
B. The address that is associated with R4's router ID.
C. The address that is associated with R2's router ID.
D. The address that is associated with R4's xe-0/0/1 interface.

Answer: B,C

NEW QUESTION 42
Exhibit:

R2 is receiving the same route from R1 and R3. You must ensure that you can load balance traffic for that route.
Referring to the exhibit, which two configuration changes will allow load balancing? (Choose two.)