View NACE-CIP1-001 Exam Question Dumps With Latest Demo [Feb 08, 2024]
Free NACE-CIP1-001 Test Questions Real Practice Test Questions
To prepare for the NACE-CIP1-001 exam, candidates can attend training courses offered by NACE or other training providers. These courses cover the topics tested on the exam and provide hands-on training in coating inspection techniques. Candidates can also study independently using study materials provided by NACE or other sources. It is recommended that candidates have a minimum of six months of experience in the coatings industry before taking the exam.
The NACE NACE-CIP1-001 exam consists of 100 multiple-choice questions and must be completed within a three-hour time frame. To be eligible to take the exam, candidates must have at least six months of experience in the coating industry, or have completed an approved training program. Upon passing the exam, individuals are awarded the Coating Inspector Level 1 certification, which is valid for five years. Coating Inspector Level 1 certification is recognized globally and is highly valued within the industry as it demonstrates a high level of competence and expertise in the field of coating inspection.
NEW QUESTION # 10
Fine cracks in the surface of a coating that rarely reach the substrate are called
- A. blistering.
- B. checking.
- C. alligatoring.
- D. cracking.
Answer: B
NEW QUESTION # 11
Digital hygrometers
- A. use a thermocouple in contact with the surface to measure temperature
- B. determine relative humidity, air temperature, and dew point temperature:
- C. consist of a bimetallic sensing element protected from wind gusts.
- D. are used to measure temperature from a distance.
Answer: B
NEW QUESTION # 12
Removal of welds splatter is required:
- A. When specifically identified in the owner's specification
- B. When ISO abrasive blast standards are specified
- C. On every job
- D. When NACE/SSPC abrasive blast standards are specified
Answer: A
NEW QUESTION # 13
An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called
- A. sagging.
- B. checking.
- C. holiday.
- D. cracking.
Answer: C
NEW QUESTION # 14
Stripe coats are generally applied to:
- A. Welds
- B. a), b), and c)
- C. Edges and corners
- D. Complex geometric shapes
Answer: B
NEW QUESTION # 15
ASTM Standards are applicable:
- A. In the USA
- B. In Asia
- C. In North America
- D. When specified
Answer: D
NEW QUESTION # 16
You ate the NACE Inspector on a job where NACE No. 2/SSPC - SP 10 has been specified. You are finding the Contractor is leaving mill scale on the on surface and as a result you have been rejecting the blast. The Contractor is very upset and has told you that the standard permits up to 5% of the mill scale to remain and still be in be in compliance with the standard.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Review the relevant standard with the Contractor
- C. Permit coating to take place so as not to lose the blast
- D. Shut the job down
Answer: B
NEW QUESTION # 17
Non Conformance Reports are completed by the Inspector:
- A. In accordance with the specification's definition of a non-conformance
- B. When the Inspector and Contractor deem it to be a significant non-conforming item
- C. When the Inspector deems it to be a significant non-conforming item
- D. In every instance that an item does not meet the specification requirements
Answer: B
NEW QUESTION # 18
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Achieve consensus through negotiation
- B. Call the supervisor
- C. Go with the majority opinion
- D. Never change his/her mind
Answer: B
NEW QUESTION # 19
Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners' representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Default to the owner's Inspection and Test Plan
- B. Meet separately with the coating manufactures' representative and coating application company in advance of the pre-job conference
- C. Gather data and attempt to meet with the owner's representative in advance of the pre-job conference
- D. Bring the matter up at the pre-job conference
Answer: D
NEW QUESTION # 20
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:
- A. Level 1
- B. Level 3
- C. Level 4
- D. Level 2
Answer: B
NEW QUESTION # 21
Whenever dissimilar metals must join, the most common practice is to
- A. provide cathodic protection to prevent corrosion,
- B. avoid coating all connected dissimilar metals.
- C. provide anodic protection to prevent corrosion.
- D. coat all connected dissimilar metals.
Answer: D
NEW QUESTION # 22
In a non-convertible coating the role of the primary solvent is to:
- A. To dissolve the resin
- B. To make the coating flow out better
- C. To control the evaporation rate
- D. To promote faster cure
Answer: C
NEW QUESTION # 23
You are an inspector on a project where SSPC SP 3 is specified.
What sort of tools should you expect the Contractor to use to achieve the standard?
- A. Abrasive blast nozzles
- B. Hand tools
- C. Power tools
- D. Airless spray equipment
Answer: C
NEW QUESTION # 24
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A. Synthetic oil or grease may not be identified
- B. Chloride salt may produce a false positive
- C. Ultra-Violet light may contaminant the surface
- D. Presence of weld spatter may produce a false positive
Answer: A
NEW QUESTION # 25
Stripe coats are best applied by:
- A. Brush
- B. Airless spray
- C. Conventional spray
- D. High volume low pressure spray
Answer: A
NEW QUESTION # 26
Daily reports are important because:
Select All That Apply
- A. Management uses them to make personnel decisions.
- B. The information aids communication with supervisors.
- C. the information impacts future projects.
- D. Inspectors rarely change on a project.
Answer: A,B,C
NEW QUESTION # 27
The primary difference between Non-Convertible vs. Convertible coatings is:
- A. Non-convertible coatings do not undergo a chemical change during curing whereas Convertible coatings do
- B. Non-Convertible coatings cure by co-reaction whereas Convertible coatings do not
- C. Convertible coatings do not undergo a chemical change during curing whereas Non-Convertible coatings do
- D. Convertible coatings cure solely by solvent evaporation whereas Non-Convertible coatings do not
Answer: A
NEW QUESTION # 28
Prior to using Inspection Tools the inspector must:
- A. Read the manufactures' instructions
- B. a), b) & c)
- C. Be trained on how to use the instrument
- D. Ensure the instrument is within calibration parameters
Answer: B
NEW QUESTION # 29
Corrosion generally occurs at which of the following sites:
- A. Metallic pathway
- B. Cathode
- C. Electrolyte
- D. Anode
Answer: D
NEW QUESTION # 30
You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining.
Your FIRST preferred course of action is to:
- A. Extract any liquid that may be inside the blister and send it to the lab for further analysis
- B. Break the blisters to see what's inside
- C. Document the problem and advise the Contractor
- D. Document the problem and advise the Contractor and Owner's representative
Answer: D
NEW QUESTION # 31
If the project specification DOES NOT state the specific DFT measurement standards, the inspector should use
- A. their best judgment based on similar projects and specifications.
- B. NACE 2/SSPC SP10
- C. a detailed checklist and document the lack of a standard.
- D. a recognized industry standard like SSPC-PA 2 that is broadly accepted
Answer: D
NEW QUESTION # 32
......
View All NACE-CIP1-001 Actual Free Exam Questions Updated: https://www.actual4dumps.com/NACE-CIP1-001-study-material.html
NACE-CIP1-001 Dumps Updated Feb 08, 2024 WIith 100 Questions: https://drive.google.com/open?id=1YQSeR6-t5pDryMPq93UcveWCxnl7tM3u