Juniper JN0-1362 Practice Test Pdf Exam Material
JN0-1362 Answers JN0-1362 Free Demo Are Based On The Real Exam
NEW QUESTION 20
You are asked to provide a design proposal for a service provider's core network. The network consists of both IPv4 and IPv6 addresses and must scale up to 50 core routing devices.
In this scenario, which statement is correct regarding the IGP design?
- A. You must use IS-4S to support both address families.
- B. You can use OSPFv2 to support both address families.
- C. You can use OSPFv2 for IPv4 and OSPFv3 for IPv6 at the same time.
- D. You must use OSPFv3 to support both address families.
Answer: A
NEW QUESTION 21
Exhibit.
Referring to the exhibit considering shared fates, which Internet Transit?
- A. Customer B
- B. Customer C
- C. Customer D
- D. Customer A
Answer: A
NEW QUESTION 22
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Juniper Secure Analytics
- B. Junos Space
- C. Junoscope
- D. Junosphere
Answer: B
NEW QUESTION 23
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on stateful flow information.
- B. FlowSpec requires Jflow implementation and licensing.
- C. FlowSpec can block traffic based on the destination address.
- D. FlowSpec can block traffic based on the source address.
Answer: C,D
NEW QUESTION 24
Exhibit.
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- B. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
- C. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- D. You must implement GRE over IPsec to establish routing protocols across the circuit.
Answer: D
NEW QUESTION 25
You are deploying new WAN services between two routers and you are required to encrypt all traffic at Layer 2 Which solution would satisfy this requirement?
- A. IPsec
- B. MACsec
- C. RADIUS
- D. 802.1X
Answer: D
NEW QUESTION 26
Your customer's enterprise is adding geographically dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost.
Which type of WAN connection satisfies the customer's requirement in this scenario?
- A. MPLS Layer 3 VPN
- B. leased line dedicated circuit
- C. Internet connection with IPsec
- D. transparent Layer 2 service
Answer: D
NEW QUESTION 27
Since deploying VPLS, you notice an unusually high level of traffic In your nine topology. On further inspection, you determine that broadcast traffic is causing the problem. The traffic is legitimate. Nevertheless, you are asked to look into options that allow the network to scale.
In this scenario, what would you do to solve the problem?
- A. Mark broadcast traffic with a high drop priority.
- B. Add a broadcast policer and an unknown unicast policer to each VPLS.
- C. Deploy P2MP LSPs.
- D. Move from LDP-signaled VPLS to BGP-signaled VPLS.
Answer: C
NEW QUESTION 28
You work for a service provider that offers L3VPN services to its customers. While designing L3VPN solutions for customers, you sometimes need to share routes between routing instances as part of the design.
What are two reasons for sharing routes between routing-instances? (Choose two)
- A. to allow the service provider's OoB network to be reachable by customers
- B. so customers can reach the Internet
- C. to support network address translation
- D. so customers can reach the service provider's public cloud infrastructure
Answer: B,D
NEW QUESTION 29
Which two network availability features require a router to have two Routing Engines installed? (Choose two.)
- A. GRES
- B. nonstop routing
- C. JVRRP
- D. graceful restart
Answer: B,C
NEW QUESTION 30
You are asked to design a WAN for a large enterprise. Each site must have multiple connections for redundancy. MPLS is not available at every site but it is preferred where available.
Which topology satisfies these design requirements?
- A. hub-and-spoke SD-WAN
- B. hub-and-spoke Internet WAN
- C. full mesh MPLS VPN
- D. full mesh SD-WAN
Answer: A
NEW QUESTION 31
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
- A. Prepend your AS number multiple times on the prefix advertised to SP-B.
- B. Prepend your AS number multiple times on the prefix advertised to SPA.
- C. Advertise the prefix to SP-A with a higher local preference.
- D. Advertise the prefix to SP-B with a higher local preference.
Answer: A
NEW QUESTION 32
Your company's automation team is testing a controller-based solution for dynamic LSP management They do not want the topology acquisition process to allow the controller to become a transit node of the core network's.
Which solution would fulfill the requirements?
- A. PCCD
- B. PCEP
- C. BGP-LS
- D. BGP-LU
Answer: B
NEW QUESTION 33
You are asked to improve the convergence time in your large enterprise WAN Each branch office network is multihomed to two central aggregation points using BGP.
Which action would satisfy the requirement?
- A. Decrease interface hold timers.
- B. Use Bidirectional Forwarding Detection.
- C. Provision more WAN bandwidth.
- D. Increase interface hold timers.
Answer: B
NEW QUESTION 34
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- B. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- C. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
- D. SD-WAN dynamically manages customer traffic across multiple WAN connections.
Answer: C,D
NEW QUESTION 35
Your organization expenenced a man-in-the-middle attack and must protect against future attacks.
In this scenario, what must you do to protect your network?
- A. Implement flowspec
- B. Implement destination-based RTBH
- C. Implement MACsec.
- D. Implement EVPN
Answer: D
NEW QUESTION 36
You are designing a service provider core network As part of the design, you must ensure that the MPLS network utilizes the traffic engineering database (TED) for path selection and resiliency. You have chosen OSPF as the IGP for your design.
In this scenario which statement is correct?
- A. You must disable traffic engineering in OSPF to use the TED.
- B. You must enable traffic engineering in OSPF to populate the TED.
- C. OSPF cannot be used to populate the TED.
- D. OSPF populates the TED by default.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/example/ospf-traffic-engineeringenabling.html
NEW QUESTION 37
You are designing an MPLS-based network overlay for your environment that use either LDP or RSVP-signated LSPs.
Which two statements are true about these two signaling technologies (Choose two.) Which two statements are true about these two signaling technologies? (Choose two.)
- A. LDP leverages the IGP to find the best path across the network.
- B. RSVP requires the traffic engineering database (TED) to find the best path across the network.
- C. LDP uses EROs to influence the path of an LSP and enable traffic engineering.
- D. RSVP enables an administrator to configure different traffic types to take different paths across the MPLS network.
Answer: A,D
NEW QUESTION 38
As a service provider network architect, you are working with a potential customer who wants to replace their WAN, consisting of two data centers, one HQ, and 76 branch offices Due to application latency requirements between branch offices, the customer insists that all traffic must take the most optimal path through the service provider network. The customer intends to encrypt all traffic between customer routers at each location.
Which WAN technology would you propose in this scenario?
- A. Internet as WAN
- B. point-to-point Layer 2 VPNs
- C. H-VPLS
- D. Layer 3 VPN
Answer: A
NEW QUESTION 39
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge.
Which two statements are correct in this scenario? (Choose two )
- A. VRRP will only support two routers
- B. VRRP dynamically elects master and backup routers
- C. The VRRP master and backup send advertisements to each other at regular intervals.
- D. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
Answer: B,C
NEW QUESTION 40
......
JN0-1362 [Nov-2021] Newly Released] Exam Questions For You To Pass: https://www.actual4dumps.com/JN0-1362-study-material.html