[Jul 06, 2023] Pass Nutanix NCP-MCI-6.5 Exam Info and Free Practice Test
NCP-MCI-6.5 Exam Dumps PDF Updated Dump from Actual4Dumps Guaranteed Success
The Nutanix NCP-MCI-6.5 exam is designed to certify IT professionals' expertise in managing and deploying a multicloud infrastructure using Nutanix technology. Nutanix is a leading provider of cloud computing solutions, and this certification validates the skills required to design, deploy, and manage a hybrid cloud infrastructure using Nutanix technology.
The Nutanix NCP-MCI-6.5 certification exam is designed for IT professionals who want to validate their skills and knowledge in implementing and managing Nutanix technologies in a multicloud environment. This certification is ideal for individuals who work with Nutanix solutions, including administrators, engineers, and architects. The NCP-MCI-6.5 exam tests candidates on their ability to deploy, manage, and troubleshoot Nutanix solutions across multiple cloud environments.
The NCP-MCI-6.5 certification exam covers a wide range of topics, including Nutanix cluster installation and configuration, storage management, virtualization, networking, security, and administration. The exam is designed to test the candidate's ability to deploy and manage Nutanix infrastructure in a multicloud environment.
NEW QUESTION # 79
An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.
But users are reporting disk latency.
What could cause the performance issues?
- A. Compression is disabled on the vDisk storage container.
- B. Data size for flash mode exceeds 25% of the SSD capacity.
- C. Flash mode is disabled when a node fails.
- D. The VMs vDisks are in multiple containers.
Answer: B
Explanation:
data size for flash mode exceeds 25% of the SSD capacity could cause the performance issues. Flash mode is a feature that allows vDisks to be pinned to SSDs for faster access, but it has a limit of 25% of the SSD capacity per node. If this limit is exceeded, some vDisks may be evicted from flash mode and cause disk latency2.
NEW QUESTION # 80
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increase memory utilization%
- B. Increasing CPU counts will decrease memory utilization
- C. Increase CPU ready%
- D. Increase CPU utilization%
Answer: A,B
NEW QUESTION # 81
Refer to the exhibit.
An administrator is trying to implement the solution that is shown in the exhibit, but has been unsuccessful.
Based on the diagram, what is causing the issue?
- A. Network latency
- B. A remote Witness VM
- C. Unsupported hypervisor
- D. Active containers in both sites
Answer: A
NEW QUESTION # 82
Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error.
What steps does the administrator need to take to install the OS?
- A. Load the Virtual SCSI pass-through controller.
- B. Load the Nutanix Virtual Balloon Driver.
- C. Load the Nutanix VirtIO Serial Bus Driver.
- D. Load the VirtIO Network Ethernet Adaper.
Answer: A
NEW QUESTION # 83
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the network the VMs are connected to
- B. Change the spanning-tree port type on the switch.
- C. The VMs need to have static IP addresses.
- D. Update the switch to specifically allow VLAN 15
Answer: D
NEW QUESTION # 84
Which component is supported by Prism Central storage policies?
- A. Volume Groups
- B. VM Templates
- C. Storage Containers
- D. Virtual Machines
Answer: A
NEW QUESTION # 85
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?
- A. Copy-on-Write
- B. Redirect-On-Write
- C. Continuous Data Protection
- D. Split-mirror
Answer: B
NEW QUESTION # 86
In a default configuration of an AHV cluster, a single node fails.
What happens to the running VMs on that node?
- A. The VMs do a live migration to the master node in the cluster
- B. The VMs do a live migration to any other node in the cluster
- C. The cluster attempts to restart VMs on other hosts
- D. The cluster restarts all VMs in the event of a host failure
Answer: C
NEW QUESTION # 87
What are two minimum prerequisites for live migration to succeed? (Choose two.)
- A. All AHV hosts have IP addresses in the same subnet
- B. All VMs are configured for the same VLAN
- C. All VMs have an IP address in the same subnet
- D. All AHV hosts must be configured on the same VLAN
Answer: A,D
NEW QUESTION # 88
Prism Central will be installed manually on an AHV cluster.
Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)
- A. boot
- B. data
- C. home
- D. tmp
- E. var
Answer: A,B,C
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-scratch-c.html
NEW QUESTION # 89
Which scenario would benefit most from Erasure Coding being enabled on a container?
- A. VDI use cases where a single VM is cloned 100's of times
- B. High performance database where all is relatively hot.
- C. Long term storage of data which is written once and read infrequently
- D. WEB and API Servers
Answer: C
NEW QUESTION # 90
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. Node B sends a leadership request to the Witness VM and goes into single-node mode.
- B. The cluster is unaffected and no administrator intervention is required.
- C. The- cluster becomes unavailable and goes into read-only mode.
- D. All operations and services on the Node B are shut down and go into a waiting state.
Answer: A
NEW QUESTION # 91
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
Explanation
Step 1 ---> Login into Prism Element.
Step 2 ---> Select the Gear Icon at top right of the page.
Step 3 ---> Click Upgrade Software.
Step 4 ---> Select the component to upgrade.
Step 5 ---> Click download.
Step 6 ---> Once the download completes, select upgrade.
Invalid:-
1 - Select Prism Central.
2 - Select user login.
3 - On left select upgrade Prism Central.
NEW QUESTION # 92
What is Prism Central primarily used for?
- A. Multi-cluster Single Sign On
- B. Multi-cluster network configuration
- C. Data reduction configuration
- D. Container creation
Answer: A
NEW QUESTION # 93
An administrator receives complaints of poor performance in a particular VM.
Based on the VM performance metric, what is the most likely cause of this behavior?
- A. The host's CPU is severely overloaded.
- B. Oplog is full cannot serve IO request from this VM.
- C. The VM needs more vCPUs
- D. SSD tier is not big enough to serve workloads' IOPS demand.
Answer: D
Explanation:
one of the key metrics to consider for VM performance is IOPS (Input/Output Operations Per Second), which is a measure of the number of input/output requests a device processes per second3. Another metric is throughput, which is a measure of how much data a device transfers per second3.
NEW QUESTION # 94
Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?
- A. Acropolis App Mobility Fabric
- B. Distributed Storage Fabric
- C. High Availability
- D. Cassandra
Answer: D
NEW QUESTION # 95 
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. Port 80 is blocked by a firewall.
- B. The administrator does not have a valid portal account.
- C. The license assigned to the cluster has expired.
- D. Port 433 Is blocked by a firewall.
Answer: D
NEW QUESTION # 96
How will an HDD failure affect VMs with data on the failed device?
- A. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.
- B. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
- C. The VMs will remain operational on that host and continue to function normally with no noticeable impact
- D. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.
Answer: C
NEW QUESTION # 97
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?
- A. SNMP
- B. SMTP
- C. DNS
- D. NTP
Answer: D
Explanation:
NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.
NEW QUESTION # 98
......
Pass Your Nutanix Exam with NCP-MCI-6.5 Exam Dumps: https://www.actual4dumps.com/NCP-MCI-6.5-study-material.html
NCP-MCI-6.5 Exam Dumps - Nutanix Practice Test Questions: https://drive.google.com/open?id=1rhQ0HGupWEYw0Iz2BaXDnHAARvg7H6l9