JN0-635 Exam Dumps Pass with Updated Nov-2021 Tests Dumps
JN0-635 exam questions for practice in 2021 Updated 90 Questions
NEW QUESTION 39
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- C. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- D. The SRX1500 device does not support more than two logical interfaces per tenant system
Answer: B
NEW QUESTION 40
Click the Exhibit button.
A user is trying to reach a company's website, but the connection errors out. The security policies are configured correctly.
Referring to the exhibit, what is the problem?
- A. DNS ALG must be disabled
- B. The action for rule 1 must change to static-nat inet
- C. Static NAT is missing a rule for DNS server
- D. Persistent NAT must be enabled
Answer: C
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
- A. monitor mode
- B. in-line tap mode
- C. integrated mode
- D. sniffer mode
Answer: C
NEW QUESTION 42
Which two log format types are supported by the JATP appliance? (Choose two.)
- A. XML
- B. YAML
- C. YANG
- D. CSV
Answer: A,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/topic-map/jatp-custom-log-ingestion.html
NEW QUESTION 43
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. ARP security is securing data across the control interface
- B. MACsec is securing data across the control interface
- C. IPsec is securing data across the control interface
- D. SSH is securing data across the control interface
Answer: B
NEW QUESTION 44
You are asked to look at a configuration that is designed to take all traffic with a specific source ip address and forward the traffic to a traffic analysis server for further evaluation. The configuration is no longer working as intended.
Referring to the exhibit which change must be made to correct the configuration?
- A. Apply the filter as in input filter on interface xe-0/2/1.0
- B. Create a routing instance named default
- C. Apply the filter as in input filter on interface xe-0/0/1.0
- D. Apply the filter as in output filter on interface xe-0/1/0.0
Answer: C
NEW QUESTION 45
You have the NAT rule, shown in the exhibit, applied to allow communication across an IPsec tunnel between your two sites with identical networks. Which statement is correct in this scenario?
- A. The NAT rule in applied to the N/A routing instance.
- B. The NAT rule with translate the source and destination addresses.
- C. The NAT rule will only translate two addresses at a time.
- D. 10 packets have been processed by the NAT rule.
Answer: B
NEW QUESTION 46
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION 47
Click the Exhibit button.
Referring to the exhibit, which three types of traffic would be examined by the IPS policy between Switch-1 and Switch-2? (Choose three.)
- A. TCP
- B. ARP
- C. ICMP
- D. LLDP
- E. UDP
Answer: A,C,E
NEW QUESTION 48
You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?
- A. You cannot add more than 16 feeds with the available open API
- B. You have reached the maximum limit of 29 total feeds
- C. You cannot add more than 16 feeds through the available open API
- D. You must wait 48 hours for the feed to update
Answer: B
NEW QUESTION 49
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an output filter on interface xe-0/1/0.0
- B. Apply the filter as an input filter on interface xe-0/2/1.0
- C. Create a routing instance named default
- D. Apply the filter as an input filter on interface xe-0/0/1.0
Answer: D
NEW QUESTION 50
You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)
- A. The DNS CNAME record is translated.
- B. The DNS doctoring ALG is enabled by default.
- C. The Proxy ARP feature must be configured.
- D. The DNS doctoring ALG is not enabled by default.
Answer: B,C
NEW QUESTION 51
You have downloaded and initiated the installation of the application package for the JATP Appliance on an SRX1500. You must confirm that the installation of the application package has completed successfully.
In this scenario, which command would you use to accomplish this task?
- A. show services application-identification application version
- B. show services application-identification application detail
- C. show services application-identification version
- D. show services application-identification status
Answer: D
NEW QUESTION 52
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)
- A. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
- B. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
- C. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- D. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
Answer: A,D
NEW QUESTION 53
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 54
Which three type of peer devices are supported for Cos-Based IPsec VPN?
- A. High-end SRX Series device
- B. Branch-end SRX Series devics
- C. cSRX
- D. vSRX
Answer: A,B,D
NEW QUESTION 55
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable - B. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - C. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint - D. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector
Answer: D
NEW QUESTION 56
Click the Exhibit button.
Your company has purchased a competitor and now must connect the new network to the existing one. The competitor's gateway device is receiving its ISP address using DHCP. Communication between the two sites must be secured; however, obtaining a static public IP address for the new site gateway is not an option at this time. The company has several requirements for this solution:
* A site-to-site IPsec VPN must be used to secure traffic between the two sites;
* The IKE identity on the new site gateway device must use the hostname option; and
* Internet traffic from each site should exit through its local Internet connection.
The configuration shown in the exhibit has been applied to the new site's SRX, but the secure tunnel is not working.
In this scenario, what configuration change is needed for the tunnel to come up?
- A. Change the IKE policy mode to aggressive
- B. Remove the quotes around the hostname
- C. Bind interface st0 to the gateway
- D. Apply a static address to ge-0/0/2
Answer: B
NEW QUESTION 57
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the connectivity association key and the connectivity association key name match on both devices
- B. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
- C. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
- D. Verify that the interface between the two devices is up and not experiencing errors
Answer: A
NEW QUESTION 58
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of two interfaces.
- C. The collector must have a minimum of three interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: A
NEW QUESTION 59
Click the Exhibit button.
Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
- A. monitor mode
- B. in-line tap mode
- C. integrated mode
- D. sniffer mode
Answer: C
NEW QUESTION 60
Which two VPN features are supported with CoS-based IPsec VPNs? (Choose two.)
- A. IKEv1
- B. VPN monitoring
- C. IKEv2
- D. dead peer detection
Answer: C,D
NEW QUESTION 61
......
Important Details to Know about JN0-635 Certification Test
The content covered by this JN0-635 exam is provided through recommended tutor-conducted courses and other comprehensive resources. You can obtain more information about this in the up and coming sections of this article. Also, you need to have the JNCIS-SEC certification as a prerequisite for the JNCIP-SEC certificate. To register for JN0-635 exam, create an account with Pearson VUE. You can choose a test center of your choice and then select JN0-635 in the list of tests. If you have already taken Juniper Networks evaluations before, you can register with your existing CertManager ID.
Authentic JN0-635 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.actual4dumps.com/JN0-635-study-material.html
Updated Premium JN0-635 Exam Engine pdf: https://drive.google.com/open?id=17cFW55ivZZREGme03lpgSv6rB0EtMD_G