Jan-2023 FREE VMware 5V0-22.21 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY 5V0-22.21 DUMPS
Get to know about the salary of a VMware 5V0-22.21 Certified professional
If you are looking to know the salary of a VMware 5V0-22.21 Certified expert, then you can get to know about it. It depends on the experience, qualification, position, job title, industry, and location. The salary is different for every expert. The salary of a VMware 5V0-22.21 Certified expert, who passes the exam with the assistance of the 5V0-22.21 Dumps is highly dependent on the location and industry. The average salary of a VMware 5V0-22.21 Certified professional is as follows:
- In Canada: 45,000 CAD
- In the United States: 70,000 USD
- In Australia: 48,000 AUD
- In India: 50,000 INR
- In the UK: 55,000 GBP
NEW QUESTION 75
A remote location was configured with Cloud Native Storage. When the administrator put the host in maintenance mode to perform monthly patching, the File Server Health check was triggered.
Which action, if any, should the administrator take to resolve the issue?
- A. It will resolve after 60 seconds, so no action is necessary.
- B. Remove the host from maintenance mode, and put it back with Full Data Migration.
- C. Modify the repair delay timer to 75.
- D. Click the Repair Objects Immediately button in the VMware Skyline Health Checks.
Answer: D
NEW QUESTION 76
After merging the IT infrastructure of two enterprises, the vSAN administrator was tasked to add one ESXi host with no disks to one of the existing vSAN clusters.
Which two actions should the vSAN administrator take to complete this task? (Choose two.)
- A. This is only possible by presenting iSCSI shares from the existing vSAN cluster.
- B. Make sure the host has physical NICs with equal network throughput.
- C. Create a vSAN VMKernel interface on the new host.
- D. Create the required disk groups for the newly added host.
- E. This is only possible by adding a minimum of three ESXi hosts.
Answer: C,D
Explanation:
To add an ESXi host with no disks to an existing vSAN cluster, the vSAN administrator needs to take the following steps:
Create a vSAN VMKernel interface on the new host, the interface should be configured with the same network settings as the existing vSAN cluster.
Create the required disk groups for the newly added host, the disk groups should contain at least one cache device and one or more capacity devices.
Add the new host to the vSAN cluster, this can be done through the vSphere Web Client.
Configure the storage policies and assign them to the virtual machines as needed.
It's worth noting that adding a host to an existing vSAN cluster does not require adding a minimum of three ESXi hosts or iSCSI shares, the host can be added without these requirements. Also, having physical NICs with equal network throughput is recommended but not a requirement.
This is explained in VMware vSAN documentation in the section "Adding a Host to a vSAN Cluster" Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-guide/GUID-5B5F5F5D-9F9E-4E4F-9CA3-4CEF36E5D8F5.html
NEW QUESTION 77
An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend. In preparation, the administrator runs the Data Migration Pre-Check.
Which two items are being checked? (Choose two.)
- A. Affinity rules
- B. DRS settings
- C. Object compliance and accessibility
- D. Cluster capacity
- E. vSphere HA state
Answer: C,D
NEW QUESTION 78
The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage.
What is a possible reason for this situation?
- A. Not enough capacity for slack space is on vSAN datastore.
- B. Data ^synchronization is in progress.
- C. DRS is invoking multiple vMotion migrations.
- D. There is VM storage I/O traffic.
Answer: B
NEW QUESTION 79
A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.
What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)
- A. Add additional compute-only hosts from the vSAN cluster.
- B. Add to the existing disk groups two cache devices and the eight capacity devices.
- C. Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.
- D. Add cache and capacity devices to the compute-only hosts.
- E. Add additional cache and capacity devices to the existing data nodes.
Answer: D,E
NEW QUESTION 80
An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
- A. Increased vSAN datastore capacity
- B. Additional compute capacity for running VMs
- C. Reduced vSphere licensing
- D. Shared metadata between separate clusters
Answer: C
NEW QUESTION 81
The DevOps team of an organization wants to deploy their new cloud native application with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
- A. A dedicated network for vSAN Direct
- B. An integration with vSAN File Services
- C. vSphere HA enabled on the vSAN cluster
- D. Unclaimed disks in the hosts for vSAN Direct
- E. A valid vSAN license for the vSAN cluster
Answer: A,C
NEW QUESTION 82
In vSAN 7.0 U1, when a host enters into maintenance mode (EMM) using the "Ensure Accessibility" option, it will allow vSAN to write to another host in addition to the host holding the object replica.
What does vSAN write to that additional host?
- A. The stripe from the host entering maintenance mode
- B. A full replica and all incremental updates that happened once the host entered maintenance mode
- C. All incremental updates that happened once the host entered maintenance mode
- D. A full replica
Answer: B
NEW QUESTION 83
A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:
* Physical adapters share capacity among several traffic types
* Guaranteed bandwidth for vSAN during bandwidth contention
* Enhanced security
Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)
- A. Create static routes between the vSAN hosts
- B. Isolate vSAN traffic in a VLAN
- C. Utilize Network I/O Control
- D. Use IOPS Limit rules in storage policies
- E. Enable jumbo frames
Answer: B,C
Explanation:
According to VMware's official guide, Network I/O Control (NIOC) should be utilized in order to share the physical adapters' capacity among several traffic types. Additionally, isolating the vSAN traffic in a VLAN will provide enhanced security, as it isolates vSAN traffic from the rest of the network traffic. Enabling jumbo frames and creating static routes between the vSAN hosts will not provide the desired result, as these are not related to the requirements. Utilizing IOPS Limit rules in storage policies is also not related to the requirements, as this is related to storage policies and not network configuration.
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html About the vSAN Default Storage Policy
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html
https://core.vmware.com/resource/vmware-vsan-design-guide
VMware vSAN Design Guide | VMware
https://core.vmware.com/resource/vmware-vsan-design-guide
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html vSAN Policies
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html
NEW QUESTION 84
A vSAN administrator is looking forward to managing hypervisor, server drivers, and firmware all in one cluster image using vLCM. The vSAN administrator edits the desired Image and selects the desired ESXi version and Vendor Addon but is unable to add any firmware.
Why is there no firmware available to add to the image?
- A. All hosts in the cluster have the most current firmware installed already, and as a result, vLCM has no firmware to add to the image.
- B. In order for firmware addons to be available, the administrator must first deploy the server vendor Hardware Support Manager <HSM) and import the appropriate server vendor bundle.
- C. The hosts listed in the cluster is managed by a vSphere Update Manager, so firmware updates are not possible.
- D. The vCenter server version is older than 7.0, and as a result, vLCM does not support firmware addons.
Answer: B
Explanation:
In order for firmware addons to be available, the administrator must first deploy the server vendor Hardware Support Manager (HSM) and import the appropriate server vendor bundle. This is explained in detail in the VMware documentation, specifically in the section titled "Deploy the Hardware Support Manager" in the "Using vSphere Lifecycle Manager" document.
NEW QUESTION 85
An application refactor requires significant storage that is being added for logs stored on a VM vDISK. The application VMs runs on a dedicated vSAN enabled vSphere Cluster with custom CPUs and RAM, and therefore, cannot vMotion to another vSAN enabled cluster.
The administrator needs a vSAN feature that can be used to allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster.
Which vSAN feature should be used for this purpose?
- A. vSAN HCI Mesh
- B. vSAN Replication
- C. vSAN File Services
- D. vSAN Stretched Clusters
Answer: A
Explanation:
According to the VMware documentation [1], vSAN HCI Mesh is a feature of vSAN that enables the allocation of storage from one vSAN enabled vSphere cluster to another, allowing for the sharing of resources between clusters. This is particularly useful in scenarios such as the one described, where additional storage needs to be allocated from another vSAN enabled cluster. [1] https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-esxi-vcenter-server-70-vsan-hci-mesh-guide.pdf
NEW QUESTION 86
What should be used to verify object resynchronization progress and impact after a global policy change?
- A. vCenter HTML5 client
- B. vRealize Log Insight
- C. vRealize Network Insight
- D. HCI Bench
Answer: B
Explanation:
To verify object resynchronization progress and impact after a global policy change, you can use vRealize Log Insight (C). According to the VMware Official Guide, "The vRealize Log Insight dashboard can be used to verify object resynchronization progress and impact after a global policy change."
NEW QUESTION 87
A 5-node vSAN cluster contains multiple virtual machines, and a vSAN storage policy with the rule "Failures to tolerate" set to "1 failure - RAID-5 (Erasure Coding)" is assigned. A vSAN administrator has changed the rile in the assigned policy to "2 failures - RAID-6 (Erasure Coding)".
What is the result of this change?
- A. No changes occur until the policy is reapplied.
- B. The policy change is rejected immediately.
- C. The updated policy is serially applied to the virtual machines.
- D. Changes are queued for 60 minutes.
Answer: B
NEW QUESTION 88
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics.
Which performance category should the vSAN administrator open?
- A. Disks
- B. Backend
- C. Resync Latency
- D. Host Network
Answer: B
NEW QUESTION 89
An administrator is tasked to create a Kerberos secured NFS v4.1 file share. Which information is minimally required during the configuration of the File Service?
- A. Organizational Unit, User Account. Password
- B. Active Directory Domain, Organizational Unit, User Account, Password
- C. Active Directory Domain, User Account, Password
- D. Kerberos Server, User Account, Password
Answer: B
Explanation:
To create a Kerberos secured NFS v4.1 file share, minimally the Active Directory Domain (D), Organizational Unit (A), User Account (A), and Password (A) must be provided during the configuration of the File Service. According to the VMware Official Guide, "To configure Kerberos-secured NFS v4.1 file share, you must provide the Active Directory domain, organizational unit, user account, and password."
NEW QUESTION 90
Which situation could cause a vSAN stretched cluster to fail?
- A. Layer 3 communication from the data sites to the witness site
- B. Blocked UDP ports on the firewall between data sites
- C. 5ms round-trip lime (RTT) between data sites
- D. Static routes between the witness site and data sites
Answer: B
Explanation:
A stretched cluster in vSAN requires a reliable, low latency Layer 3 communication from the data sites to the witness site. Therefore, an interruption of Layer 3 communication from the data sites to the witness site could cause a vSAN stretched cluster to fail. Additionally, blocked UDP ports on the firewall between data sites and high latency (RTT) of more than 5ms between data sites could also cause failure of the vSAN stretched cluster.
NEW QUESTION 91
A 5-node vSAN cluster contains multiple virtual machines, and a vSAN storage policy with the rule "Failures to tolerate" set to "1 failure - RAID-5 (Erasure Coding)" is assigned. A vSAN administrator has changed the rile in the assigned policy to "2 failures - RAID-6 (Erasure Coding)".
What is the result of this change?
- A. No changes occur until the policy is reapplied.
- B. The policy change is rejected immediately.
- C. Changes are queued for 60 minutes.
- D. The updated policy is serially applied to the virtual machines.
Answer: C
NEW QUESTION 92
A vSAN administrator has recently upgraded a vSAN cluster to 7.0 U1 and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?
- A. Underutilized space is above 25-30% of the total capacity threshold.
- B. The used space on vSAN datastore exceeds the suggested slack rebuild threshold.
- C. The physical disk has reached an 80% full reactive rebalance threshold.
- D. The used space on vSAN datastore exceeds the suggested host rebuild threshold.
Answer: A
NEW QUESTION 93
Which two characteristics are associated with vSAN Data-In-Transit Encryption? (Choose two.)
- A. Can be enabled independently of the vSAN Data-At-Rest encryption
- B. Uses AES-256 bit encryption
- C. Needs to be enabled using vSAN Storage Policies
- D. Requires an external KMS in order to work
- E. Needs specific configuration on the Network switches in order to be enabled
Answer: A,B
NEW QUESTION 94
In a 2-node vSAN cluster, one node has recovered from failure with FTT=1 and RAID-1 storage policy.
Refer to the exhibit:
What is the total VMDK storage consumed?
- A. 100GB
- B. 133GB
- C. 150 GB
- D. 200GB
Answer: D
NEW QUESTION 95
An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.
The final check requires the administrator to pull out a disk from one of the vSAN hosts.
Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)
- A. All components on the device will be marked as degraded.
- B. All components on the device will be marked as absent.
- C. By default. vSAN will start the rebuilding of affected components immediately.
- D. By default vSAN will delay the rebuilding of affected components for 30 minutes.
- E. By default. vSAN will delay the rebuilding of affected components for 60 minutes.
Answer: B,C
NEW QUESTION 96
......
Latest VMware 5V0-22.21 Dumps with Test Engine and PDF: https://www.actual4dumps.com/5V0-22.21-study-material.html
VMware 5V0-22.21 Exam Dumps Are Essential To Get Good Marks: https://drive.google.com/open?id=1oOEwMWEH6m8iJ_YFerOnA3X14FBAYfrQ