IBM S1000-007 Real Exam Questions and Answers FREE
Exam Dumps S1000-007 Practice Free Latest IBM Practice Tests
IBM S1000-007 : IBM AIX v7 Administrator Specialty exam is a certification exam developed by IBM to validate the skills and knowledge of professionals working with IBM AIX v7 operating system. IBM AIX v7 is a Unix-based operating system designed specifically for IBM Power Systems servers. S1000-007 exam is designed to test the administrator's ability to perform tasks related to the installation, configuration, and maintenance of AIX v7.
NEW QUESTION # 28
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mkrep
- B. oem_setup_env
- C. mJcvdev
- D. mlcvterm
Answer: C
NEW QUESTION # 29
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. read-write permissions
- B. no permissions
- C. write-only permissions
- D. read-only permissions
Answer: A
NEW QUESTION # 30
An administrator wants to check which system tunables have been changed in the system since last boot. Which procedure provides the information needed?
- A. View the /etc/tunables/currentconfig file and search for change marks in the file.
- B. Run tunsave -f ./currentconfig; more ./currentconfig.
- C. Run the no, ioo and scftedo commands with the -cf flag.
- D. Run lstuncfg -1 I grep -v DEFAULT.
Answer: D
Explanation:
The procedure to check which system tunables have been changed in the system since last boot is to run the 'lstuncfg -1 | grep -v DEFAULT' command. The lstuncfg command is used to display the current configuration of the system tunables. By using the '-1' option, the command will display the system tunables and whether they have been changed since the last system reboot. The 'grep -v DEFAULT' command will filter out the default values, allowing you to see only the tunables that have been changed. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/lstuncfg.htm.
NEW QUESTION # 31
Which statement is true regarding the snap command?
- A. By default, it will check there is enough space where the data is to be stored.
- B. All options are enabled by default.
- C. The data must be stored in /tmp.
- D. It collects performance related data.
Answer: A
Explanation:
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 32
What AIX feature will allow data to be mirrored to a remote site?
- A. Asynchronous Dispersed Logical Volumes
- B. Mirror Pools
- C. Remote Volume Groups
- D. Geographic Logical Volume Manager
Answer: D
NEW QUESTION # 33
A SAN administrator increased the size of a LUN device (hdisk) that is being used by a AIX LPAR. However, the system administrator does not see the new size using the lsvg or Ispv commands.
Which command updates the system with the new size?
- A. synclvodm
- B. extendpv
- C. cfgmgr
- D. chvg -g
Answer: B
NEW QUESTION # 34
Which logical volume Mirror Write Consistency policy should an AIX V7.2 administrator use to achieve the data consistency between mirrors?
- A. round robin
- B. off
- C. superstrict
- D. active
Answer: C
Explanation:
The superstrict mirror write consistency policy is the most reliable policy for achieving data consistency between mirrors in AIX V7.2. This policy will maintain the data consistency between mirrors by writing the data to both mirrors before the write operation is acknowledged as complete. Reference: IBM AIX v7 Administration Specialty Study Guide (section 10.6.2, pp. 651-652).
NEW QUESTION # 35
An application administrator needs an account on the AIX server, but does not know it which group it should belong. What is the default group for AIX users, if one was not specified during creation of the account?
- A. staff
- B. the group name will be the same as the user name
- C. users
- D. no group
Answer: B
NEW QUESTION # 36
A SAN administrator increased the size of a LUN device (hdisk) that is being used by a AIX LPAR. However, the system administrator does not see the new size using the lsvg or Ispv commands.
Which command updates the system with the new size?
- A. synclvodm
- B. extendpv
- C. cfgmgr
- D. chvg -g
Answer: C
Explanation:
The cfgmgr command updates the system configuration database with the current configuration of the devices attached to the system. When the SAN administrator increases the size of a LUN device (hdisk), it is not automatically reflected on the AIX LPAR. Running the cfgmgr command updates the system with the new size information and makes it visible to the system administrator.
NEW QUESTION # 37
An AIX administrator installed the fileset named useful_fileset. How can they determine which files are included in the fileset?
- A. rpm -qf useful_fileset
- B. lppchk -f useful fileset
- C. lslpp -f useful_fileset
- D. file -f useful__fileset
Answer: C
NEW QUESTION # 38
An administrator has a test server (my host) that uses local name resolution. The administrator arrives late one morning and finds that their co-worker was asked to make some changes to the IP address of the server.
The co-worker used SMIT from the console, but then when testing from the console, the following command fails:
ping my_host
Why did the ping fail?
- A. They didn't reboot the server.
- B. They used an incorrect gateway address.
- C. They didn't update the DNS entry.
- D. They didn't update /etc/hosts after mktcpip was run.
Answer: D
NEW QUESTION # 39
Which command will show when a file was last accessed?
- A. who -f file
- B. Is -1 file
- C. fsdb file
- D. istat file
Answer: D
Explanation:
The istat command displays information about the inode of a file, including the last access time. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "istat file", where 'file' is the path to the file you would like to check. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/istat.htm.
NEW QUESTION # 40
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. yum
- B. installp
- C. rpm
- D. dpkg
Answer: C
NEW QUESTION # 41
Which user account is always UID 0 on AIX?
- A. bin
- B. system
- C. root
- D. admin
Answer: C
Explanation:
The root account is the special user in the /etc/passwd file with the user ID (UID) of 0 and is commonly given the user name, root. It is not the user name that makes the root account so special, but the UID value of 0. This means that any user that has a UID of 0 also has the same privileges as the root user. Also, the root account is always authenticated by means of the local security files.
https://www.ibm.com/docs/en/aix/7.2?topic=passwords-root-account
NEW QUESTION # 42
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. mkvterm
- B. lssyscfg
- C. vtmenu
- D. lsrefcode
Answer: B
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lssyscfg command is used to display detailed information about a system configuration. It can also be used to open a virtual terminal session to an AIX LPAR.
NEW QUESTION # 43
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. no permissions
- B. write-only permissions
- C. read-only permissions
- D. read-write permissions
Answer: C
NEW QUESTION # 44
An application administrator needs an account on the AIX server, but does not know it which group it should belong. What is the default group for AIX users, if one was not specified during creation of the account?
- A. staff
- B. no group
- C. users
- D. the group name will be the same as the user name
Answer: C
Explanation:
This is the default primary group for all newly created AIX user accounts. From the IBM AIX v7 Administrator Specialty Study Guide: "By default, all new user accounts are assigned to the 'users' primary group."
NEW QUESTION # 45
......
Verified S1000-007 Exam Dumps Q&As - Provide S1000-007 with Correct Answers: https://www.actual4dumps.com/S1000-007-study-material.html
S1000-007 Exam Questions | Real S1000-007 Practice Dumps: https://drive.google.com/open?id=1HhduTSayIQEq6Ivndpel8C8YHHb_W3D3