Excellent MS-203 Updated 2024 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Microsoft MS-203
NEW QUESTION # 19
Your company named ADatum Corporation has a Microsoft Exchange Online subscription that contains the sharing policies shown in the following table.
The subscription contains the mailboxes shown in the following table.
ADatum does business with the partner companies shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 20
You have a Microsoft Exchange Online subscription.
You run the following command.
Set-ActiveSyncOrganizationSettings -DefaultAccessLevel Block
You run Get-ActiveSyncDeviceAccessRule | f1 Identity, AccessLevel, Characteristic, QueryString and you receive the following output.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 21
You manage a Microsoft Exchange Online subscription.
You use Advanced Threat Protection (ATP).
A partner company sends daily invoices to your company. The invoices are always named AdatumInvoice.xlsx.
Some users report that sometimes they cannot find the invoices in their Inbox folder.
You need to identify whether the invoices are identified as malicious by Microsoft 365.
Which two blades should you use? To answer, select the appropriate blades in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 22
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has an Exchange Online tenant that contains 2,000 mailboxes.
A partner company named Fabrikam, Inc. uses a third-party messaging solution. The outbound SMTP server for Fabrikam uses an IP address of 131.107.2.22.
You discover that several email messages from the fabrikam.com domain are erroneously marked as spam.
You need to ensure that all the email messages sent from the fabrikam.com domain are delivered successfully to the user mailboxes of your company.
Solution: You create a connection filter.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation
You can allow the server IP address in the Connection Filter. This would achieve the objective of ensuring all email from Fabrikam.com is delivered. However, it would also allow any other company that uses the thirdparty email server to bypass the spam filter.
The fact that the question specifies that Fabrikam uses a "third-party messaging solution" suggests that the answer to this question should be No although technically it would work.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/create-safe-sender-lists-in-office-
365?view=o365-worldwide
NEW QUESTION # 23
You have a Microsoft Exchange Server 2019 hybrid deployment.
All Mailbox servers and domain controllers are in the same site.
You deploy an Edge Transport server.
You need to ensure that all SMTP traffic between the on-premises organization and Exchange Online is routed through the Edge Transport server.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 24
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that the users in your tenant can only share calendar availability information with users in the tenant and users in a domain named contoso.com.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
From the Microsoft 365 admin center dashboard, go to Admin > Exchange.
Go to Organization > Sharing.
Under Organization Sharing, click New +.
In new organization relationship, in the Relationship name box, type a friendly name for the organization relationship.
In the Domains to share with box, type the domain for the external Microsoft 365, Office 365, or Exchange on-premises organization you want to let see your calendars. If you need to add more than one domain, you can do it after you create the organization relationship by editing it.
Select the Enable calendar free/busy information sharing check box to turn on calendar sharing with the domains you listed. Set the sharing level for calendar free/busy information and set which users can share calendar free/busy information.
To set the free/busy access level, select one of the following values:
- Calendar free/busy information with time only
- Calendar free/busy with time, subject, and location
To set which users will share calendar free/busy information, select one of the following values:
- Everyone in your organization
- A specified security group
Click Browse to pick the security group from a list, then click OK.
Click Save to create the organization relationship.
Reference:
https://docs.microsoft.com/en-us/exchange/sharing/organization-relationships/create-an-organization-relationship
NEW QUESTION # 25
You have a Microsoft Exchange Server 2019 hybrid deployment.
All Mailbox servers and domain controllers are in the same site.
You deploy an Edge Transport server.
You need to ensure that all SMTP traffic between the on-premises organization and Exchange Online is routed through the Edge Transport server.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
New-EdgeSubscription -FileName "c:\EdgeServerSubscription.xml" This example creates the Edge Subscription file. It should be run on your Edge Transport server. New-EdgeSubscription -FileData ([byte[]]$(Get-Content -Path "C:\EdgeServerSubscription.xml" -Encoding Byte -ReadCount 0)) -Site "Default-First-Site-Name" This example also imports the Edge Subscription file generated in Example 1 to the Active Directory site Default-First-Site-Name; however, the end result is accomplished using one command. You must run this command on the Mailbox server. ref. https://docs.microsoft.com/en-us/powershell/module/exchange/mail-flow/new-edgesubscription?view=exchange-ps
NEW QUESTION # 26
You have a Microsoft Exchange Server 2019 hybrid deployment that contains the public folders shown in the following table.
You plan to migrate the public folders to Exchange Online to improve the collaboration options available to users.
Which public folders can be migrated to Office 365 groups without losing the folders' existing functionality?
- A. PF2 and PF3 only
- B. PF2 only
- C. PF1 and PF2 only
- D. PF1 only
- E. PF3 only
Answer: A
Explanation:
Explanation
Not PF1. Office 365 groups are 'flat' so you would lose the folder hierarchy.
Reference:
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/migrate-to-microsoft-365-groups?view=
NEW QUESTION # 27
You have a Microsoft Exchange Online tenant.
The tenant has the following Exchange ActiveSync configurations.
Which mail client can Android device users use?
- A. Microsoft Outlook for iOS and Android only
- B. native Exchange ActiveSync clients only
- C. neither native Exchange ActiveSync clients nor Microsoft Outlook for Android
- D. both native Exchange ActiveSync clients and Microsoft Outlook for Android
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/new-activesyncdeviceaccessrule?view=exchange-ps
NEW QUESTION # 28
You run the following PowerShell command in a Microsoft 365 environment.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the command.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
NEW QUESTION # 29
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that all email sent or received by a user named Diego Siciliani is preserved in Exchange Online. The solution must prevent Diego Siciliani from permanently deleting any email messages for 180 days.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
You need configure a Retention Policy. You could also use a Litigation Hold but Retention Policies are replacing Litigation Holds in future, so a Retention Policy is the way to go.
In the Microsoft 365 Compliance Center, go to the Policies section and click Retention.
Click the New retention policy link.
Enter a name for the policy (such as "Diego Siciliani Email Retention") and click Next.
In the retention period, enter 180 days and click Next.
Ensure that only Exchange email is selected. SharePoint sites, OneDrive accounts and Office 365 groups are also selected by default so you may need to deselect them.
Click the Choose recipients link for Exchange email.
Click the Choose recipients button to open a list of recipients.
Select Admin1 and click the Choose button then click the Done button.
Click Next.
Click the Create this policy button.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/retention-policies
NEW QUESTION # 30
You are evaluating the email hygiene configuration of a Microsoft Exchange Server 2019 organization.
You run the command shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/antispam-antimalware/set-contentfilterconfig?view=exchange-ps
NEW QUESTION # 31
You have a Microsoft Exchange Online tenant as shown in the following exhibit.
All email recipients have an email address that uses an SMTP suffix of @contoso.com.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 32
You have a Microsoft Exchange Server 2019 hybrid deployment.
You are migrating public folder data to Exchange Online by using a migration batch of the PublicFolder type.
You need to identify the sync status of each move request in the batch.
Which cmdlet should you run?
- A. Get-PublicFolderMigrationRequesc
- B. Gee-MoveRequest
- C. Gec-PublicFolderMailboxMigracionRequest
- D. Gec-PublicFolderMoveRequesc
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/get-publicfoldermailboxmigrationrequest?view=e
NEW QUESTION # 33
Your network contains an Active Directory domain named corp.contoso.com. The domain contains client computers that have Microsoft Office 36S Apps installed. You have a hybrid deployment that contains a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 server named Server1. All recipients use an email address suffix of Contoso.com.
You migrate all the Exchange Server recipients to Exchange Online, and then decommission Server1.
Users connected to the internal network report that they receive an Autodiscover error when they open Microsoft Outlook.
You need to ensure that all users can connect successfully to their mailbox by using Outlook.
Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Modify the name of the TLS certificate.
- B. From the corp.contoso.com DNS zone, modify the Autodiscover host (A) record.
- C. Add an accepted domain.
- D. From the domain, modify the Autodiscover service connection point (SCP).
- E. From the contoso.com DNS zone, modify the Autodiscover alias (CNAME) record
Answer: D,E
NEW QUESTION # 34
Your network contains an Active Directory domain and an Azure Active Directory (Azure AD) tenant in a hybrid deployment.
You implement a Microsoft Exchange Online tenant.
You plan to deploy a new on-premises app named App1 to a Windows server. The solution must meet the following requirements:
Use an Active Directory user account named App1service as a service account.
Be able to receive email requests by using an email address of [email protected].
Use App1service to sign in to the mailbox of App1 to view the requests.
In the domain, you create App1service.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Sync the App1 service account to Azure AD
2 - Assign a license to App1 service
3 - Assign [email protected] as an email address tp App1service
NEW QUESTION # 35
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that a user named Lee Gu can view all the Exchange Online configurations of your organization. The solution must use the principle of least privilege.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
1. Open the Microsoft 365 administration centre
This can be done at: https://admin.microsoft.com
2. Create a new user
Please enter a first name
Last name
Display name
Username
3. Add the necessary licence
For admin roles you sometimes need a licence. Especially in the security stack within Microsoft 365.
4. Add the Global Reader role via Roles
You can give multiple roles to the person you want.
Reference:
https://365tips.be/en/how-to-create-a-global-reader-account-for-your-it-supplier/
NEW QUESTION # 36
Your company named Contoso, Ltd. has a Microsoft Exchange Server 2019 hybrid deployment.
A partner company named Fabrikam, Inc. uses an Exchange Online subscription for email.
You need to ensure that all the users at Fabrikam can view the free/busy information of the users at Contoso.
What should you configure? To answer, drag the appropriate components to the correct companies. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/exchange/sharing-exchange-2013-help
https://docs.microsoft.com/en-us/exchange/sharing/organization-relationships/organization-relationships
NEW QUESTION # 37
You create a transport rule as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/policy-and-compliance/new-transportrule?view=exchange-ps
NEW QUESTION # 38
You have a Microsoft Exchange Server 2019 organization.
You need to provide a user named User1 with the ability to create and manage transport rules.
To which management role group should you add User1?
- A. Compliance Management
- B. Records Management
- C. Hygiene Management
- D. Server Management
Answer: B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/exchange/records-management-exchange-2013-help
NEW QUESTION # 39
......
Microsoft MS-203 exam is a challenging certification exam that requires extensive preparation and study. Candidates are encouraged to use various resources to prepare for the exam, such as instructor-led training, online courses, practice tests, and study guides. Microsoft also provides official study resources for the exam, including a study guide, exam reference book, and online training modules. With the right preparation and study, candidates can pass the Microsoft MS-203 exam and earn the Microsoft 365 Certified: Messaging Administrator Associate certification.
Microsoft 365 Messaging Certification Sample Questions and Practice Exam: https://www.actual4dumps.com/MS-203-study-material.html
Real Exam Questions and Answers - Microsoft MS-203 Dump is Ready: https://drive.google.com/open?id=1gcETiUt27qtBIqjfjb-opOe1s1CUM53y