[Apr 05, 2023] Today Updated 300-730 Exam Dumps Actual Questions
300-730 exam dumps with real Cisco questions and answers
What Career Opportunities and Salary Will You Get?
After passing the related exams and earning the CCNP Security or the Network Security VPN Implementation certifications, the candidates can develop their careers in the field of network security and VPN execution. Such validations will open up various job opportunities for aspiring candidates with generous annual pay. For instance, applicants may choose to opt for the following roles with the annual average salaries as covered by Payscale.com below:
- Network Engineer: $74,768;
- Network Design Engineer: $80,000.
- Security Engineer: $92,263;
- IT Team Leader: $88,440;
- Network Analyst: $59,725;
What happens after I pass the Cisco 300-730 Exam?
After you pass the Cisco 300-730 Exam, you will be issued a certificate of accomplishment. The Cisco 300-730 Exam does not expire. You can view your exam results online anytime after you pass the Cisco 300-730 Exam. The Cisco 300-730 Dumps is required for this certification and must be completed to obtain it. This exam tests a candidate's knowledge and skills related to designing enterprise network solutions that are based on Cisco Unified Communications Manager and Cisco Unity Connection in addition to distributed call processing, telephony integration, and mobility management. Cisco recommends that candidates have. If you do not have any experience with these technologies before taking the Cisco 300-730 Exam. Updates simulator engine are Updated. We recommend that you take one of the following preparatory courses: Cisco recommends that candidates have: If you do not have any experience with these technologies before taking the Cisco 300-730 Exam, we recommend that you take one of the following preparatory courses: Passing any 642 Certification exam will result in receiving a CCNA Collaboration certification valid.
There are no formal prerequisites for this certification exam, but the chances that you will pass it will be much higher if you fulfill the following criteria:
- Next, they should also have some experience managing and navigating firewalls and Cisco routers;
- Lastly, the individuals should have some experience with different firewall and Cisco router command modes.
- For starters, it will be very beneficial for the candidates if they have a good understanding of the site-to-site and Remote Access VPN options;
All in all, there are no strict requirements to fulfill, so you can whether have some prior experience to make things easier for you or can learn the exam content with great deliberation and try to master it to succeed. In any of these scenarios, your level of preparation and the skills you have gained will ultimately make a difference in your final result.
NEW QUESTION 11
Which VPN does VPN load balancing on the ASA support?
- A. IPsec site-to-site tunnels
- B. Cisco AnyConnect
- C. VTI
- D. L2TP over IPsec
Answer: B
Explanation:
Section: Secure Communications Architectures
NEW QUESTION 12
Which VPN solution uses TBAR?
- A. GETVPN
- B. Cisco AnyConnect
- C. VTI
- D. DMVPN
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get- vpn-xe-3s-book/sec-get-vpn.html
NEW QUESTION 13
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-connect
- B. auto-run
- C. auto-upgrade
- D. auto-start
Answer: D
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/vpn/ asa_91_vpn_config/webvpn-configure-policy-group.html
NEW QUESTION 14
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. GRE over IPsec on IOS router
- B. IPsec tunnel on FTD
- C. GRE tunnel on ASA
- D. GRE over IPsec on FTD
Answer: D
Explanation:
Section: Secure Communications Architectures
NEW QUESTION 15
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. Smart Tunnel
- B. WebType ACL
- C. plug-ins
- D. single sign-on
Answer: A
NEW QUESTION 16 
Refer to the exhibit. What is a result of this configuration?
- A. Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.
- B. Spoke 2 fails the authentication because the remote authentication method is incorrect.
- C. Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.
- D. Spoke 1 fails the authentication because the authentication methods are incorrect.
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 17
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server to authenticate IPv6 peers by using EAP
- B. FlexVPN server to authorize groups by using an IPv6 external AAA
- C. FlexVPN server for an IPv6 dVTI session
- D. FlexVPN client profile for IPv6
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-3s/sec-flex- vpn-xe-3s-book/sec-cfg-flex-clnt.html
NEW QUESTION 18
Refer to the exhibit.
Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
- A. group-policy
- B. group-alias
- C. address-pool
- D. tunnel-group
Answer: D
NEW QUESTION 19
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. AnyConnect client must point to the standby IP address.
- B. Configure a backup server in the XML profile.
- C. The vpnsession-db must be cleared manually.
- D. AnyConnect images must be uploaded to both failover ASA devices.
Answer: D
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ ha_active_standby.html
NEW QUESTION 20
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
- A. anyconnect profile SSL_profile flash:simos-profile.xml
- B. webvpn import profile SSL_profile flash:simos-profile.xml
- C. svc import profile SSL_profile flash:simos-profile.xml
- D. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/200533- AnyConnect-Configure-Basic-SSLVPN-for-I.html
NEW QUESTION 21
Refer to the exhibit.
What is a result of this configuration?
- A. Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.
- B. Spoke 2 fails the authentication because the remote authentication method is incorrect.
- C. Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.
- D. Spoke 1 fails the authentication because the authentication methods are incorrect.
Answer: D
NEW QUESTION 22
Which two remote access VPN solutions support SSL? (Choose two.)
- A. Cisco AnyConnect
- B. FlexVPN
- C. EZVPN
- D. L2TP
- E. clientless
Answer: A,E
NEW QUESTION 23
Which technology works with IPsec stateful failover?
- A. HSRP
- B. GLBR
- C. GRE
- D. VRRP
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512
NEW QUESTION 24
What is a requirement for smart tunnels to function properly?
- A. The user on the client machine must have admin access.
- B. Stateful failover must not be configured.
- C. Java or ActiveX must be enabled on the client machine.
- D. Applications must be UDP.
Answer: C
NEW QUESTION 25
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?
- A. IKEv2 authorization policy
- B. virtual template
- C. Group Policy
- D. webvpn context
Answer: C
Explanation:
Section: Secure Communications Architectures
NEW QUESTION 26
A network engineer must design a clientless VPN solution for a company. VPN users must be able to access several internal web servers. When reachability to those web servers was tested, it was found that one website is not being rewritten correctly by the ASA.
What is a potential solution for this issue while still allowing it to be a clientless VPN setup?
- A. Set up a NAT rule that translates the ASA public address to the web server private address on port 80.
- B. Set up Cisco AnyConnect with a split tunnel that has the IP address of the web server.
- C. Set up a smart tunnel with the IP address of the web server.
- D. Set up a WebACL to permit the IP address of the web server.
Answer: C
NEW QUESTION 27
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. ESP traffic is being dropped.
- B. The ISAKMP policy priority values are invalid.
- C. Tunnel protection is not applied to the DMVPN tunnel.
- D. The Phase 1 policy does not match on both devices.
Answer: A
NEW QUESTION 28 
Refer to the exhibit. Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. transform set
- B. crypto access list
- C. Phase 1 policy
- D. preshared key
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409- ipsec-debug-00.html#ike
NEW QUESTION 29
Refer to the exhibit.
An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 4: ACCESS-LIST
- B. phase 5: NAT
- C. phase 3: UN-NAT
- D. phase 9: rpf-check
Answer: C
NEW QUESTION 30
......
Exam Sure Pass Cisco Certification with 300-730 exam questions: https://www.actual4dumps.com/300-730-study-material.html
300-730 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1J_Q2m_DqpMuTOQMnXIx40r5fP140rpII