[2021] HPE6-A72 Answers HPE6-A72 Free Demo Are Based On The Real Exam
HPE6-A72 [Oct-2021 Newly Released] Exam Questions For You To Pass
For more info about Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
NEW QUESTION 38
Refer to the exhibit.
All four switches in the diagram have been configured with the region name "Aruba1".
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
- A. MST version number
- B. MST revision number
- C. MST region type
- D. MST VLAN to instance mapping
- E. MST Bridge ID
Answer: B,D
NEW QUESTION 39
Refer to the exhibit.
What configuration is needed in order for "show LLDP configuration" to show this output?
- A. none; LLDP is enabled by default on Aruba switches
- B. configuring LLDP globally only
- C. configuring LLDP both globally and on the interfaces
- D. enabling LLDP on the interfaces only
Answer: A
NEW QUESTION 40
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# ip vpn-instance Green
- B. Core(config-if-vlan)# vrf attach Green
- C. Core(config-if-vlan)# routing-context Green vrf
- D. Core(config-if-vlan)# ip vrf forwarding Green
Answer: B
NEW QUESTION 41
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION 42
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. RIPng
- B. ISIS
- C. Local
- D. EIGRP
- E. BGP
Answer: C,E
NEW QUESTION 43
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. pathping
- B. netstatus
- C. tracert
- D. traceroute
- E. ping
Answer: D,E
NEW QUESTION 44
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2
Answer: A
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION 45
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 1/4/15
- B. 8400(config)# interface 2/3/17
- C. 8400(config)# interface 2/4/15
- D. 8400(config)# interface 1/7/16
Answer: C
NEW QUESTION 46
What are two available options as part of a DHCP offer message? (Choose two.)
- A. Subnet Mask
- B. VLANID
- C. DNS server IP
- D. LLDP-MED
- E. SSID
Answer: A,C
NEW QUESTION 47
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Better Core router performance by offloading processing
- B. Using access control lists (ACLs) at the Core to improve performance
- C. Shifting endpoint access to the Aggregation layer from the Access layer
- D. Connecting WAN/MPLS and Data center access to the Aggregation layer
Answer: A
NEW QUESTION 48
Click on the colored box that corresponds with the line that best represents Multicast traffic flow.
Answer:
Explanation:
Explanation:
Blue Box
NEW QUESTION 49
The following command is issued:
Switch# checkpoint rollback start
What is the result?
- A. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
- B. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
- C. The command will fail because rollback commands must be issued from global-config mode.
- D. The command will fail because it is incomplete.
Answer: B
NEW QUESTION 50
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- B. NetEdit can run on a mobile device using Android or Apple IOS.
- C. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- D. NetEdit can perform configuration and compliance validation.
- E. NetEdit includes trial licensing for up to 10 nodes.
Answer: C,D
NEW QUESTION 51
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 52
With what other technology does Half Duplex communication closely match?
- A. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- B. CB radio using push-to-talk
- C. point-to-point connections between two switches allowing concurrent transmit and receive
- D. a mobile phone call
Answer: B
NEW QUESTION 53
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 trunk
- B. show interface port 1/1/10 switchport
- C. show vlan port 1/1/10
- D. show trunk port 1/1/10 extended
Answer: D
NEW QUESTION 54
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: A
NEW QUESTION 55
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181 - B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.1 - C. Host-B: assign the default-gateway address 10.1.20.181
- D. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181
Answer: A
NEW QUESTION 56
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. SSH
- B. SNMPv2c
- C. HTTPS
- D. Telnet
- E. USB-C console
Answer: A,C
NEW QUESTION 57
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
- B. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- C. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- D. VLAN 50 was never added to the vlan-database and therefore is in a down state.
Answer: B
NEW QUESTION 58
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- B. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- D. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
Answer: A
NEW QUESTION 59
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show system
- B. The command inventory
- C. The command show running-configuration
- D. The command version
Answer: A
NEW QUESTION 60
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. operates in both the 2.4GHz and 5GHz radios bands
- B. operates only in the 5GHz similar to 802.11ac
- C. is an emerging satellite connection standard to allow wireless access anywhere in the world
- D. allows transmissions of up to 4.8Gbps
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: A,D
Explanation:
Explanation/Reference:
NEW QUESTION 61
Which two port characteristics must match between LAG interfaces? (Choose two.)
- A. Chassis number
- B. Media type
- C. Member ID
- D. Port number
- E. Duplex
Answer: B,E
NEW QUESTION 62
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show interface optics
- B. show interface transceiver
- C. show interface physical
- D. show inventory
Answer: B
NEW QUESTION 63
......
New 2021 Realistic Free HP HPE6-A72 Exam Dump Questions & Answer: https://www.actual4dumps.com/HPE6-A72-study-material.html
HP HPE6-A72 Exam: Basic Questions With Answers: https://drive.google.com/open?id=1vjUhyQRJ6YSMzros8NswK783UNxxZAH9