Best Quality Cisco 350-401 Exam Questions Actual4Dumps Realistic Practice Exams [2025]
Critical Information To Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Pass the First Time
Cisco 350-401, also known as Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR), is a certification exam designed to test the knowledge and skills of IT professionals in planning, configuring, and verifying the implementation of complex enterprise network solutions. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is intended for network engineers, administrators, and architects who work in medium to large organizations and are responsible for designing, deploying, and managing enterprise network infrastructure.
NEW QUESTION # 128
Which statement about VXLAN is true?
- A. VXLAN extends the Layer 2 Segment ID field to 24-bits. which allows up to 4094 unique Layer 2 segments over the same network.
- B. VXLAN encapsulates a Layer 2 frame in an IP-UDP header, which allows Layer 2 adjacency across router boundaries.
- C. VXLAN uses TCP 35 the transport protocol over the physical data cento network
- D. VXLAN uses the Spanning Tree Protocol for loop prevention.
Answer: B
Explanation:
802.1Q VLAN identifier space is only 12 bits. The VXLAN identifier space is 24 bits. This doubling in size allows the VXLAN ID space to support 16 million Layer 2 segments -> Answer B is not correct.
VXLAN is a MAC-in-UDP encapsulation method that is used in order to extend a Layer 2 or Layer
3 overlay network over a Layer 3 infrastructure that already exists.
Reference: https://www.cisco.com/c/en/us/support/docs/lan-switching/vlan/212682-virtual- extensible-lan-and-ethernet-virt.html
NEW QUESTION # 129
Which EIGRP feature allows the use of leak maps?
- A. neighbor
- B. offset-list
- C. address-family
- D. stub
Answer: D
Explanation:
Explanation
If we configured an EIGRP stub router so that it only advertises connected and summary routes.
But we also want to have an exception to this rule then we can configure a leak-map. For example:
R4(config-if)#router eigrp 1
R4(config-router)#eigrp stub
R4(config)#ip access-list standard R4_L0opback0
R4(config-std-nacl)#permit host 4.4.4.4
R4(config)#route-map R4_L0opback0_LEAKMAP
R4(config-route-map)#match ip address R4_L0opback0
R4(config)#router eigrp 1
R4(config-router)#eigrp stub leak-map R4_L0opback0_LEAKMAP
As we can see the leak-map feature goes long with 'eigrp stub' command.
NEW QUESTION # 130
Which protocol is implemented to establish secure control plane adjacencies between Cisco SD-WAN nodes?
- A. IKE
- B. DTLS
- C. IPsec
- D. ESP
Answer: B
Explanation:
The Cisco SD-WAN control plane has been designed with network and device security in mind. The foundation of the control plane is one of two security protocols derived from SSL (Secure Sockets Layer)-the Datagram Transport Layer Security (DTLS) protocol and the Transport Layer Security (TLS) protocol.
NEW QUESTION # 131
Which next generation firewall feature supports separate security services for multiple departments?
- A. virtual switch mode to provide traffic inspection capabilities for the flows entering the firewall and dropping packets based on policy configuration
- B. state sharing mode to .trade the user data sessions and replication to the neighbor firewall using a failover link
- C. multicontext mode with specific logical or physical interface allocation within each context and grouped into security zones
- D. Layer 3 mode with resource tracking capabilities and automatic configuration synchronization between the nodes and security zones
Answer: C
NEW QUESTION # 132
Refer to the exhibit.
An engineer must configure HSRP for VLAN 1000 on SW2. The secondary switch must immediately take over the role of active router If the interlink with the primary switch fails. Which command set completes this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 133
An engineer must configure a ACL that permits packets which include an ACK In the TCP header. Which entry must be Included In the ACL?
- A. access-list 110 permit tcp any any eq 21 established
- B. access-list 10 permit ip any any eq 21 tcp-ack
- C. access-list 110 permit tcp any any eq 21 tcp-ack
- D. access-list 10 permit tcp any any eq 21 established
Answer: A
NEW QUESTION # 134
Which statement about an RSPAN session configuration is true?
- A. A special VLAN type must be used as the RSPAN destination.
- B. A fitter mutt be configured for RSPAN Regions
- C. Only incoming traffic can be monitored
- D. Only one session can be configured at a time
Answer: A
Explanation:
Explanation
in all participating switches -> This VLAN can be considered a special VLAN type -> Answer 'A special VLAN type must be used as the RSPAN destination' is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/r elease/12-2_55_se/configuration/guide/3750xscg/swspan.html We can configure multiple RSPAN sessions on a switch at a time, then continue configuring multiple RSPAN sessions on the other switch without any problem -> Answer 'Only one session can be configured at a time' is not correct.
This is how to configure Remote SPAN (RSPAN) feature on two switches. Traffic on FastEthernet0/1 of Switch 1 will be sent to Fa0/10 of Switch2 via VLAN 40.
+ Configure on both switches
Switch1,2(config)#vlan 40
Switch1,2(config-vlan)#remote-span
+ Configure on Switch1
Switch1(config)# monitor session 1 source interface FastEthernet 0/1
Switch1(config)# monitor session 1 destination remote vlan 40
+ Configure on Switch2
Switch2(config)#monitor session 5 source remote vlan 40
Switch2(config)# monitor session 5 destination interface FastEthernet 0/10
NEW QUESTION # 135
Refer to the exhibit.
A wireless client is connecting to FlexAP1 which is currently working standalone mode. The AAA authentication processis returning the following AVPs:
Which three behaviors will the client experience? (Choose three.)
- A. When the AP transitions to connected mode, the client will be de-authenticated.
- B. While the AP is in standalone mode, the client will be placed in VLAN 15.
- C. While the AP is in standalone mode, the client will be placed in VLAN 10.
- D. When the AP is in connected mode, the client will be placed in VLAN 13.
- E. When the AP is in connected mode, the client will be placed in VLAN 10.
- F. While the AP is in standalone mode, the client will be placed in VLAN 13.
- G. When the AP is in connected mode, the client will be placed in VLAN 15.
- H. When the AP transitions to connected mode, the client will remain associated.
Answer: A,C,G
Explanation:
+ From the output of WLC -show interface summary, we learned that the WLC has four VLANs: 999, 14, 15 and 16. + From the -show ap config general FlexAP1 output, we learned that FlexConnect AP has four VLANs: 10, 11, 12 and 13. Also the WLAN of FlexConnect AP is mapped to VLAN 10 (from the line -WLAN 1: ...... 10 (AP-Specific)).
From the reference at: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/ch7_HREA.html FlexConnect VLAN Central Switching Summary Traffic flow on WLANs configured for Local Switching when FlexConnect APs are in connected mode are asfollows:
+ If the VLAN is returned as one of the AAA attributes and that VLAN is not present in the FlexConnect APdatabase, traffic will switch centrally and the client is assigned this VLAN/Interface returned from the AAAserver provided that the VLAN exists on the WLC. (-> as VLAN 15 exists on the WLC so the client inconnected mode would be assigned this VLAN -> Answer 'When the AP is in connected mode, the client will beplaced in VLAN 15' is correct) + If the VLAN is returned as one of the AAA attributes and that VLAN is not present in the FlexConnect APdatabase, traffic will switch centrally. If that VLAN is also not present on the WLC, the client will be assigned aVLAN/Interface mapped to a WLAN on the WLC. + If the VLAN is returned as one of the AAA attributes and that VLAN is present in the FlexConnect APdatabase, traffic will switch locally. + If the VLAN is not returned from the AAA server, the client is assigned a WLAN mapped VLAN on thatFlexConnect AP and traffic is switched locally.
Traffic flow on WLANs configured for Local Switching when FlexConnect APs are in standalone mode are asfollows:
+ If the VLAN returned by the AAA server is not present in the FlexConnect AP database, the client will be puton a default VLAN (that is, a WLAN mapped VLAN on a FlexConnect AP) (-> Therefore answer 'While the APis in standalone mode, the client will be placed in VLAN 10' is correct). When the AP connects back, this clientis de-authenticated (-> Therefore answer 'When the AP transitions to connected mode, the client will be de-authenticated' is correct) and will switch traffic centrally.
NEW QUESTION # 136
Which JSON script is properly formatted?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 137
Refer to the exhibit.
Refer to me exhibit. What is the cause of the log messages?
- A. hello packet mismatch
- B. OSPF area change
- C. IP address mismatch
- D. MTU mismatch
Answer: B
NEW QUESTION # 138
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 139
A network administrator is Implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process. Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two.)
- A. Configure the logging delimiter feature
- B. increase the number of lines on the screen using the terminal length command
- C. Configure the logging synchronous command under the vty
- D. Press the TAB key to reprint the command in a new line
- E. Configure the logging synchronous global configuration command
Answer: C,D
NEW QUESTION # 140
Drag the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 141
Drag and drop the solutions that comprise Cisco Cyber Threat Defense from the left onto the objectives they accomplish on the right.
Answer:
Explanation:
.
NEW QUESTION # 142
Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 143
Refer to the exhibit.
Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
With BGP, we must advertise the correct network and subnet mask in the "network" command (in this case network 10.1.1.0/24 on R1 and network 10.2.2.0/24 on R2). BGP is very strict in the routing advertisements. In other words, BGP only advertises the network which exists exactly in the routing table. In this case, if you put the command "network x.x.0.0 mask 255.255.0.0" or
"network x.0.0.0 mask 255.0.0.0" or "network x.x.x.x mask 255.255.255.255" then BGP will not advertise anything.
It is easy to establish eBGP neighborship via the direct link. But let's see what are required when we want to establish eBGP neighborship via their loopback interfaces. We will need two commands:
+ the command "neighbor 10.1.1.1 ebgp-multihop 2" on R1 and "neighbor 10.2.2.2 ebgpmultihop
2" on R1. This command increases the TTL value to 2 so that BGP updates can reach the BGP neighbor which is two hops away.
+ Answer 'R1 (config) #router bgp 1
R1 (config-router) #neighbor 192.168.10.2 remote-as 2
R1 (config-router) #network 10.1.1.0 mask 255.255.255.0
R2 (config) #router bgp 2
R2 (config-router) #neighbor 192.168.10.1 remote-as 1
R2 (config-router) #network 10.2.2.0 mask 255.255.255.0
Quick Wireless Summary
Cisco Access Points (APs) can operate in one of two modes: autonomous or lightweight
+ Autonomous: self-sufficient and standalone. Used for small wireless networks.
+ Lightweight: A Cisco lightweight AP (LAP) has to join a Wireless LAN Controller (WLC) to function.
LAP and WLC communicate with each other via a logical pair of CAPWAP tunnels.
- Control and Provisioning for Wireless Access Point (CAPWAP) is an IETF standard for control messaging for setup, authentication and operations between APs and WLCs. CAPWAP is similar to LWAPP except the following differences:
+CAPWAP uses Datagram Transport Layer Security (DTLS) for authentication and encryption to protect traffic between APs and controllers. LWAPP uses AES.
+ CAPWAP has a dynamic maximum transmission unit (MTU) discovery mechanism.
+ CAPWAP runs on UDP ports 5246 (control messages) and 5247 (data messages) An LAP operates in one of six different modes:
+ Local mode (default mode): measures noise floor and interference, and scans for intrusion detection (IDS) events every 180 seconds on unused channels
+ FlexConnect, formerly known as Hybrid Remote Edge AP (H-REAP), mode: allows data traffic to be switched locally and not go back to the controller. The FlexConnect AP can perform standalone client authentication and switch VLAN traffic locally even when it's disconnected to the WLC (Local Switched). FlexConnect AP can also tunnel (via CAPWAP) both user wireless data and control traffic to a centralized WLC (Central Switched).
+ Monitor mode: does not handle data traffic between clients and the infrastructure. It acts like a sensor for location-based services (LBS), rogue AP detection, and IDS
+ Rogue detector mode: monitor for rogue APs. It does not handle data at all.
+ Sniffer mode: run as a sniffer and captures and forwards all the packets on a particular channel to a remote machine where you can use protocol analysis tool (Wireshark, Airopeek, etc) to review the packets and diagnose issues. Strictly used for troubleshooting purposes.
+ Bridge mode: bridge together the WLAN and the wired infrastructure together.
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 Aps
NEW QUESTION # 144 
Refer to the exhibit. What is the value of the variable list after the code is run?
- A. [1, 2, 10, 4]
- B. [1, 2, 10]
- C. [1, 10, 10, 10]
- D. [1, 2, 3, 10]
Answer: D
NEW QUESTION # 145
Which deployment option of Cisco NGFW provides scalability?
- A. clustering
- B. tap
- C. inline tap
- D. high availability
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/asa-cluster-solution.html
NEW QUESTION # 146
......
Cisco 350-401 certification exam is recognized by many organizations worldwide. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is highly valued by employers as it validates the candidate's expertise in complex enterprise network solutions. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification provides candidates with a competitive advantage in the job market and opens up new career opportunities. Moreover, the certification is a stepping stone towards obtaining other advanced-level certifications offered by Cisco.
350-401 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.actual4dumps.com/350-401-study-material.html
Best Quality Cisco 350-401 Exam Questions: https://drive.google.com/open?id=12bEG3fG-k4J843Wz8sPUNvk-pk7fdhtd