Latest Success Metrics For Actual FCP_FGT_AD-7.6 Exam (Updated 45 Questions)
Genuine FCP_FGT_AD-7.6 Exam Dumps Free Demo Valid QA's
Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 13
A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode.
Which step is NOT part of the expected process?
- A. FortiGate determines user identity based on the IP address in the FSSO list.
- B. The collector agent forwards login event data to FortiGate.
- C. The user logs into the windows domain.
- D. The DC agent sends login event data directly to FortiGate.
Answer: B
Explanation:
In DC Agent Mode, the DC agent sends login event data directly to FortiGate without involving a collector agent.
NEW QUESTION # 14
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)
- A. On HQ-NGFW. set Encryption to AES256
- B. On HQ-NGFW, enable Diffie-Hellman Group 2.
- C. On BR1-FGT, set Seconds to 43200.
- D. On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0
Answer: C,D
Explanation:
The key lifetime (Seconds) must match on both sides; BR1-FGT is set to 14400, so setting it to 43200 matches HQ-NGFW.
The remote address on BR1-FGT should match the HQ-NGFW's local subnet (10.0.11.0/24), but it is currently set incorrectly as 172.20.1.0/24. Changing it to 10.0.11.0/255.255.255.0 will align the Phase 2 selectors.
NEW QUESTION # 15
A network administrator enabled antivirus and selected an SSL inspection profile on a firewall policy.
When downloading an EICAR test file through HTTP, FortiGate detects the virus and blocks the file. When downloading the same file through HTTPS, FortiGate does not detect the virus and does not block the file, allowing it to be downloaded.
The administrator confirms that the traffic matches the configured firewall policy.
What are two reasons for the failed virus detection by FortiGate? (Choose two.)
- A. The browser does not trust the FortiGate self-signed CA certificate.
- B. The selected SSL inspection profile has certificate inspection enabled.
- C. The website is exempted from SSL inspection.
- D. The El CAR test file exceeds the protocol options oversize limit.
Answer: A,C
NEW QUESTION # 16
An administrator wanted to configure an IPS sensor to block traffic that triggers a signature set number of times during a specific time period.
How can the administrator achieve the objective?
- A. Use IPS filter, rate-mode periodical option.
- B. Use IPS packet logging option with periodical filter option.
- C. Use IPS filter, rate-mode periodical option.
- D. Use IPS group signatures, set rate-mode 60.
Answer: C
Explanation:
The IPS filter with the rate-mode set to "periodical" allows the administrator to block traffic that triggers a signature a specified number of times within a defined time period, meeting the requirement.
NEW QUESTION # 17
A FortiGate firewall policy is configured with active authentication, however, the user cannot authenticate when accessing a website.
Which protocol must FortiGate allow even though the user cannot authenticate?
- A. LDAP
- B. DNS
- C. Kerberos
- D. TACASC+
Answer: B
Explanation:
DNS traffic must be allowed so the user can resolve domain names and reach the authentication server or web resources, even if authentication initially fails.
NEW QUESTION # 18
A network administrator is reviewing firewall policies in both Interface Pair View and By Sequence View. The policies appear in a different order in each view.
Why is the policy order different in these two views?
- A. Interface Pair View sorts policies based on matching interfaces, while By Sequence View shows the actual processing order of rules.
- B. The firewall dynamically reorders policies in Interface Pair View based on recent traffic patterns, but By Sequence View remains static.
- C. By Sequence View groups policies based on rule priority, while Interface Pair View always follows the order of traffic logs.
- D. Policies in Interface Pair View are prioritized by security levels, while By Sequence View strictly follows the administrator's manual ordering.
Answer: A
Explanation:
Interface Pair View organizes policies grouped by source and destination interfaces, whereas By Sequence View displays policies in the exact order they are processed by the firewall.
NEW QUESTION # 19
Refer to the exhibit.
Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)
- A. Administrators cannot change the configuration.
- B. FortiGate drops new sessions requiring inspection.
- C. FortiGate skips quarantine actions.
- D. Administrators must restart FortiGate to allow new session.
Answer: B,C
Explanation:
In fail-open mode, FortiGate skips quarantine actions to maintain traffic flow despite IPS or antivirus failures.
FortiGate drops new sessions that require inspection when in conserve mode and fail-open is enabled, to protect the network from potentially harmful traffic.
NEW QUESTION # 20
You have configured the below commands on a FortiGate.
What would be the impact of this configuration on FortiGate?
- A. FortiGate will enable strict RPF on ail its interfaces and port1 will be enable for asymmetric routing.
- B. Port1 will be enabled with flexible RPF, and all other interfaces will be enabled for strict RPF
- C. FortiGate will enable strict RPF on all its interfaces and port1 will be exempted from RPF checks.
- D. The global configuration will take precedence and FortiGate will enable strict RPF on all interfaces.
Answer: C
Explanation:
The global setting enables strict source checking (RPF) on all interfaces by default. The per-interface setting disables the source check on port1, exempting it from strict RPF enforcement.
NEW QUESTION # 21
Refer to the exhibit.
The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?
- A. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
- B. Move NOC_Access to the top of the list to ensure all profile settings take effect.
- C. Increase the admintimeout value under config system accprofile NOC_Access.
- D. Ensure that all NOC_Access users are assigned the super_admin role to guarantee access
Answer: C
Explanation:
The admintimeout setting in the admin access profile controls the inactivity timeout for GUI sessions. Increasing this value will extend the session duration before automatic disconnection.
NEW QUESTION # 22
Which three statements about SD-WAN performance SLAs are true? (Choose three.)
- A. They are applied in a SD-WAN rule lowest cost strategy.
- B. They monitor the state of the FortiGate device.
- C. They rely on session loss and jitter.
- D. All the SLAtargets can be configured.
- E. They can be measured actively or passively.
Answer: C,D,E
Explanation:
SD-WAN SLAs monitor metrics like packet loss and jitter to evaluate link performance.
SLA measurements can be performed using active probing or passive monitoring.
Administrators can configure all SLA target parameters to define performance criteria.
NEW QUESTION # 23
Refer to the exhibit, which shows a partial configuration from the remote authentication server.
Why does the FortiGate administrator need this configuration?
- A. To authenticate only the Training user group.
- B. To set up a RADIUS server Secret.
- C. To authenticate and match the Training OU on the RADIUS server.
- D. To authenticate Any FortiGate user groups.
Answer: A
Explanation:
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the "Training" user group on the RADIUS server.
NEW QUESTION # 24
When configuring firewall policies which of the following is true regarding the policy ID?
- A. You can create a policy in CLI with policy ID 0.
- B. A policy ID cannot be edited once a policy is created.
- C. It is mandatory to provide a policy ID while creating a firewall policy regardless of GUI or CLI.
- D. A firewall policy ID identifies the order of policy execution in firewall policies.
Answer: B
Explanation:
Once a firewall policy is created, its policy ID is fixed and cannot be changed; this ID uniquely identifies the policy within the FortiGate configuration.
NEW QUESTION # 25
What is the primary FortiGate election process when the HA override setting is enabled?
- A. Connected monitored ports > System uptime > Priority > FortiGate serial number
- B. Connected monitored ports > HA uptime > Priority > FortiGate serial number
- C. Connected monitored ports > Priority > HA uptime > FortiGate serial number
- D. Connected monitored ports > Priority > System uptime > FortiGate serial number
Answer: C
Explanation:
When HA override is enabled, FortiGate uses the following election order: number of connected monitored ports, then device priority, followed by HA uptime, and finally FortiGate serial number as a tiebreaker.
NEW QUESTION # 26
Refer to the exhibit.
The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile.
An administrator must block access to download.com, which belongs to the Freeware and Software Downloads category. The administrator must also allow other websites in the same category.
What are two solutions for satisfying the requirement? (Choose two.)
- A. Configure a separate firewall policy with action Deny and an FQDN address object for*.download.com as destination address.
- B. Set the Freeware and Software Downloads category Action to Warning.
- C. Configure a static URL filter entry for download.com with Type and Action set to Wildcard and Block, respectively.
- D. Configure a web override rating for download.com and select Malicious Websites as the subcategory.
Answer: A,C
Explanation:
Creating a static URL filter to block download.com specifically allows blocking that site without affecting the entire category.
Using a separate firewall policy with a Deny action for an FQDN address object matching download.com can also block the site while allowing others in the same category.
NEW QUESTION # 27
An administrator notices that some users are unable to establish SSL VPN connections, while others can connect without any issues.
What should the administrator check first?
- A. Ensure that user traffic is hitting the firewall policy.
- B. Ensure that the HTTPS service is enabled on SSL VPN tunnel interface
- C. Ensure that the affected users are using the correct port number.
- D. Ensure that forced tunneling is enabled to reroute all traffic through the SSL VPN
Answer: A
Explanation:
If user traffic is not matching the appropriate firewall policy that permits SSL VPN, users will be unable to establish connections, making this the first aspect to verify.
NEW QUESTION # 28
Refer to the exhibit.
What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?
- A. FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.
- B. FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.
- C. FortiGate will close the connection if the SNI does not match the CN or SAN fields.
- D. FortiGate will close the connection if the SNI does not match the CN and SAN fields
Answer: D
Explanation:
With the Server certificate SNI check set to Strict, FortiGate enforces that the SNI must match either the Common Name (CN) or Subject Alternative Name (SAN) in the server certificate; otherwise, it closes the connection.
NEW QUESTION # 29
What are three key routing principles in SD-WAN? (Choose three.)
- A. Regular policy routes have precedence over SD-WAN rules.
- B. SD-WAN rules have precedence over any other type of routes.
- C. By default. SD-WAN rules are skipped if only one route to the destination is available.
- D. By default. SD-WAN rules are skipped if the included SD-WAN members do not have a valid route to the destination.
- E. By default. SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.
Answer: B,D,E
Explanation:
SD-WAN rules are skipped if none of the SD-WAN members have a valid route to the destination.
SD-WAN rules take precedence over other route types.
SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member by default.
NEW QUESTION # 30
Refer to the exhibits.
The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver.
Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?
- A. Set the Destination address as Webserver in the Deny policy.
- B. Set the Destination address as Deny_IP in the Allow_access policy.
- C. Disable match-vip in the Allow_access policy
- D. Configure a One-to-One IP Pool object in a new policy.
Answer: A
Explanation:
To block Remote-User2's access to the Webserver, the deny policy must explicitly specify the Webserver as the destination address; otherwise, it denies traffic to all destinations, which is not the desired behavior.
NEW QUESTION # 31
......
FCP_FGT_AD-7.6 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://www.actual4dumps.com/FCP_FGT_AD-7.6-study-material.html
Printable & Easy to Use Network Security FCP_FGT_AD-7.6 Dumps 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1TQTylFmLykJcT0dUut4cRCrJDS9p7Oot